⚠ Your truck gauge only tells the driver — not dispatch
Go Beyond the Garnet SeeLeveL
In-Cab Gauge.
The Garnet SeeLeveL system shows tank levels on a display inside the truck cab. But dispatch, fleet managers, and office staff can't see any of it. Rivio sends real-time tank levels, GPS, and pump status to a cloud dashboard — so your whole team knows what every truck is doing, from anywhere.
🚨
The SeeLeveL gauge only works at the truck. Dispatch can't see tank levels, GPS, or pump status remotely.
What Is the Garnet SeeLeveL™ System?
Garnet Instruments makes in-cab digital tank gauges for liquid transport trucks. The driver sees fill levels on a display mounted in the cab — but that data stays in the truck.
🚛
In-Cab Display Only
The SeeLeveL 808-P2 and 806-B/Bi displays are mounted inside the truck cab. Dispatch, fleet managers, and office staff have no visibility into what's happening on the truck.
📵
No Remote Access
Without adding the SeeLeveL Access data portal and an ELD integration, there's no way to see truck tank levels from the office. Even with it, the data feeds through ELD — not a dedicated fleet dashboard.
🖥️
No Cloud Dashboard
Garnet doesn't offer a cloud-based fleet dashboard. You can't log in and see all your trucks, their fill levels, locations, and job history in one view.
🔧
Manual Calibration Required
The 817-USB Truck Gauge Programmer is needed to calibrate tanks and configure alarms. Calibration files are stored on a PC — not managed from the cloud.
Garnet SeeLeveL vs. Rivio
| Capability | Garnet SeeLeveL | Rivio |
|---|---|---|
| Remote tank level viewing (office/phone) | ✕ | ✓ |
| Cloud fleet dashboard | ✕ | ✓ |
| Real-time GPS tracking | ✕ | ✓ |
| Pump mode detection (vacuum/discharge) | ✕ | ✓ |
| Automated job reports | ✕ | ✓ |
| Cellular (LTE) data transmission | ✕ | ✓ |
| Dispatch alerts & notifications | ✕ | ✓ |
| Route optimization data | ✕ | ✓ |
| In-cab tank level display | ✓ | — |
| Multi-compartment support | ✓ | ✓ |
| Intrinsically safe (flammable liquids) | ✓ | — |
Garnet gives your driver a gauge. Rivio gives your entire operation visibility.
Why Fleet Operators Choose Rivio
🖥️
See Every Truck from the Office
Real-time tank levels, GPS position, and pump status for every truck — on your phone, tablet, or desktop. No radio calls needed.
📊
Know When Trucks Are Full
Rivio reports fill levels over cellular every 30 seconds. Dispatch knows exactly when a truck needs to dump — no guessing, no phone calls.
🔄
Pump Mode Detection
Rivio automatically detects whether a truck is vacuuming (collecting) or discharging (dumping). Job logs are created without driver input.
📋
Automated Job Reports
Every pump event is logged with time, location, duration, and gallons. No more paper tickets or manual data entry.
📍
Live GPS Tracking
See where every truck is on a map in real time. Speed, heading, and reverse-geocoded addresses — not just coordinates.
🛠️
Built for Liquid Haulers
Rivio was built by operators who ran septic, grease, and wastewater routes. We know the difference between an in-cab gauge and actionable fleet data.
How Rivio Installs on Your Trucks
01
Tell Us About Your Fleet
Share your truck count, tank configurations, and what you haul. We'll spec the right Rivio hardware for each truck.
02
Install in 2–3 Hours
Rivio hardware installs on the truck with minimal downtime. Sensors mount on the tank, the cellular unit connects to power, and it auto-connects to the cloud.
03
See Your Fleet Instantly
Your cloud dashboard lights up with real-time data from every truck. Tank levels, GPS, pump events, and alerts — all in one place.
Garnet SeeLeveL Alternative FAQ
Does Rivio replace the Garnet SeeLeveL gauge on my truck?
Rivio can work alongside or replace the in-cab gauge. The key difference is Rivio sends tank level data over cellular to a cloud dashboard — so dispatch and fleet managers can see what every truck is doing, remotely.
Can dispatch see tank levels without calling the driver?
Yes. That's the core problem Rivio solves. With a Garnet gauge, only the driver can see tank levels. With Rivio, dispatch sees real-time fill levels, GPS, and pump status for every truck on a live dashboard.
Does Rivio work with septic and wastewater trucks?
Absolutely. Rivio is used on septic pump trucks, grease trap trucks, portable restroom service trucks, and liquid hauling fleets. It detects vacuum vs. discharge pump modes automatically.
How does Rivio send data without WiFi?
Rivio uses built-in LTE cellular. The unit on the truck has its own cellular connection — no WiFi, no hotspot, no driver phone required.
Can I keep my Garnet SeeLeveL gauge and add Rivio?
Yes. Many operators keep the in-cab gauge for the driver while adding Rivio for remote fleet visibility. The two systems are independent.
How long does installation take?
Typical install is 2–3 hours per truck. Sensors mount on the tank, the cellular unit wires to truck power, and it connects to the cloud automatically.
Your SeeLeveL Gauge Tells the Driver.
Rivio Tells Everyone.
Add real-time remote tank levels, GPS tracking, pump mode detection, and automated job reports to every truck in your fleet. See it all from your phone or office — no driver phone calls required.